Wireless 802.11n PCI Adapter
  • Supports Multi-Language EZmax setup wizard
  • Provides further coverage, less dead spot and higher throughput(Up to 300Mbps (Download speed only.)) with MIMO  technology.
  • Supports WMM, WMM-PS (IEEE 802.11e QoS standard).
  • Supports 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 (AES with IEEE 802.1x) for high security level.
  • Supports WPS configuration button
  • Power saving, 40% less compared with other 11n adapter.
(For Middle East Only)

EW-7727In is a wireless PCI adapter which provides a simple and easy way to add or upgrade wireless connectivity to your desktop computer. This nMax PCI adapter with MIMO technology supports higher data rate up to 300Mpbs* *. You can just plug it into your computer's PCI slot and enjoy incredible high-speed wireless network access.

Wireless 802.11n devices with data rate up to 300Mbps*
EW-7727In is complied with wireless 802.11b/g/n standards with latest 11n MIMO technology to increase the wireless speed up to 6 times faster and extends the range 4 times further* to reduce "dead spots" within the wireless coverage area. The transmission data rate when connecting with wireless 802.11n devices is up to 300Mbps*, which makes signal travel farther and maintain wireless connections much reliable than standard wireless 802.11b/g network.(*Download speed only.)

Supports WPS (Wi-Fi Protected Setup) configuration
Wi-Fi Protected Setup (WPS) is a standard for easy and secure establishment of a wireless network. This wireless PCI adapter supports WPS hardware button configuration. When both ends of the wireless connection use Edimax wireless solution with WPS, it will automatically configure the wireless network with robust WPA data encryption and authentication.

Supports multi-language Ezmax setup wizard 
The included EZmax setup wizard with 12 languages and friendly UI will walk you through configuring EW-7727In to your wireless network.

Supports MIMO technology with 2 pcs detachable antennas
Supports MIMO technology with 2 detachable 3dBi antennas captures faint signals. User can flexibly combine using Edimax EA-MAS antenna relocation stand and move to better position for extended range and reduced dead spots.



  • Connect the EW-7727In wireless adapter to your computer.
  • Setup the wireless connection by running the multi-language setup wizard.
  • Connect to wireless access point or router.



  • PCI Interface
  • 2 x 3dBi Antennas
  • 1 x WPS configuration button
  • IEEE802.11b/g/n
  • 2.4000~2.4835GHz
         (Industrial Scientific  
         Medical Band)


  • 11b: 1/2/5.5/11Mbps
  • 11g: 6/9/12/24/36/48/54Mbps
  • 11n (20MHz): MCS0-15, 32 with Half Guard 
          Interval Support (up to 144Mbps)
  • 11n (40MHz): MCS0-15, 32 with
          Half Guard Interval Support (up to 300Mbps)
  • Multi-language
         EZMax Setup
  • Link
  • TX/RX
  • WEP 64/128, WPA, WPA2
  • Cisco CCX Support
  • WPS configuration
  • Max. 95% (Non Condensing)
  • 32~131°F (0~55°C)
  • Windows 2000/XP/2003/Vista
  •  132 (L) x 120(W) x 19(H) mm
  •  CE, FCC
*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.