Wireless 802.11 b/g USB Print Server
PS-1208UWg

(End-of-Life Product)

  • Complies with wireless 802.11b/g standards
  • Includes multilingual EZmax Setup Wizard
  • Shares one USB printer* among network users
  • Supports TCP/IP, IPX/SPX, NetBEUI and Apple Talk protocols
  • Supports LPR, IPP, SMB/TCP and RAW printing protocols
  • UPnP architecture



Selectable Wired or Wireless Network Connection
The Edimax PS-1208UWg USB print server supports 10/100Mbps Wired and IEEE 802.11b/g wireless network standards. Users can share the printer and configure the print server either through a wired or wireless network.

Broad Selection of Printing Methods
The PS-1208UWg USB print server supports a wide selection of printing protocols such as LPR, IPP, SMB/TCP and RAW printing. They can also work with different network protocols like, TCP/IP, IPX/SPX, NetBEUI, and Apple Talk. This gives you a variety of printing methods to choose from based on your requirements.

Fault-Tolerant Firmware Upgrades
Now, users need not worry about errors occurring in the midst of an upgrade that may subsequently stop its operations. The PS-1208UWg USB print server incorporates a fault-tolerant upgrade function that permits re-upgrading of the device should problems occur during the initial or previous upgrade session.

Secured Wireless Communication via 64/128-bit WEP, WPA & WPA2 Encryptions
The PS-1208UWg USB print server supports 64/128-bit WEP data encryption to protect your wireless network from eavesdroppers. It also supports WEP, WPA and WPA2 robust encryptions in case intruder-free and safe transmission of data are your concerns

User-friendly Setup CD Wizard and Driver*
To facilitate connection to your printer the PS-1208UWg USB print server includes a user-friendly EZmax  setup wizard. Its easy-to-use windows installation wizard simplifies and enhances driver installation for immediate use of the device. An add-on feature allows you to conveniently configure the USB print server from any network client that support web-browsing.



  • Complies with wireless 802.11b/g standards
  • Includes multilingual EZmax Setup Wizard
  • Shares one USB printer* among network users
  • Supports TCP/IP, IPX/SPX, NetBEUI and Apple Talk protocols
  • Supports LPR, IPP, SMB/TCP and RAW printing protocols
  • UPnP architecture
     

    HARDWARE INTERFACE

    CPU / MEMORY

    POWER ADAPTER

    •  One port USB port
    •  One 10/100Mbps LAN port
    •  Reset button
    •  One 2dBi antenna

    •  MIPS CPU (240MHz)
    •  2MB NOR Flash
    •  16MB SDRAM

    •  5VDC / 1A

    INSTALLATION & MANAGEMENT KITS

    SECURITY

    LED Indicators

    •  Multilingual EZmax Setup Wizard
    •  Web Management
    •  Firmware upgrade utility
    •  64/128-bit WEP Encryption and WPA-PSK,
    WPA2-PSK security
    •  WLAN
    •  STATUS
    •  LAN

    SYSTEM REQUIREMENTS

    OUTPUT POWER

    HUMIDITY & TEMPERATURE

    •  Windows 2000/XP/Vista
    •  Mac 10.4.x and above

    •  16dBm - 18dBm

    •  10~90% (Non-condensing)
    •  0~55°C

    DIMENSIONS

    CERTIFICATIONS

     

    •  62 (W) x 22 (H) x 86 (D) mm

    •  CE, FCC

     

     

    TYPICAL SETUP DIAGRAM AND RELATED PRODUCTS



    * Please check the list of compatible USB printers before you make your purchase.

     

*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.